CZJUTAI Wi-Fi 30 volt 0.30A LED Controller Class 2 Power Supply TUYA JT-EL/FC300V0300-H10
CZJUTAI Wi-Fi 30 volt 0.30A LED Controller Class 2 Power Supply TUYA JT-EL/FC300V0300-H10
CZJUTAI Wi-Fi 30 volt 0.30A LED Controller Class 2 Power Supply TUYA JT-EL/FC300V0300-H10
CZJUTAI Wi-Fi 30 volt 0.30A LED Controller Class 2 Power Supply TUYA JT-EL/FC300V0300-H10
CZJUTAI Wi-Fi 30 volt 0.30A LED Controller Class 2 Power Supply TUYA JT-EL/FC300V0300-H10

CZJUTAI

CZJUTAI Wi-Fi 30 volt 0.30A LED Controller Class 2 Power Supply TUYA JT-EL/FC300V0300-H10

$19.95
$19.95
Sold Out

Voltage: 30 Volt

Connection Type: C-TIP

Need a replacement Power Adapter? 

Whether your adapter quit working due to water damage or accidentally broken, the CZJUTAI Class 2 power adapter will get your device back up and running. Suitable for many devices, works on any power grid globally. 

CZJUTAI Class 2 Power Supply

Wi-Fi Control - via TUYA app -JUTAI RGBII

MULTI-MODE Button 

Model:  JT-EL/FC300V0300-H10 | 0.30 Amp

 

 *****IMPORTANT - MODEL NUMBERS ARE NOT A VIABLE CROSS REFERENCE!

AN IDENTICAL MODEL NUMBER CAN APPEAR ON THE SAME ADAPTER WITH VARYING CONNECTIONS AND POLARITIES.

PLEASE CHECK YOUR CONNECTOR TIP ON YOUR ADAPTER PRIOR TO ORDERING***** 

 

Connection type: C-TIP 

Input Voltage: 110v - 240v

Output 30 volt at 0.30 Amp

Right tip Negative - Left tip Positive

Mode: Button for Multi-Mode (19 Modes)

Connectivity: Wi-Fi with TUYA smart app

Polarized - lines up with keyway notch 

Works worldwide - needs a 2 prong connector for region of use.

Rain Proof: IP44 for wet locations

 

19 MODES:

  1. Auto
  2. Red
  3. Yellow
  4. Green
  5. Cyan
  6. Blue
  7. Purple
  8. White
  9. Slow Flash
  10. Jump
  11. Flash
  12. Strobe
  13. Asyn Fade
  14. Asyn Jump
  15. Multi Color
  16. In Wave
  17. Double Strobe
  18. Twinkle
  19. Off

 

DOWNLOAD THE TUYA APP to control this adapter from your smart device

       
WIFI Setup Instructions:

Ensure WIFI and Bluetooth are enabled on your device

1) Plug adapter into a working outlet
2) Press and Hold control button for 4-6 seconds and release
3) Confirm the green LED button is rapid flashing (now in paring mode)
4) Open the TUYA app, and add device - Add as a smart plug - enter Wi-Fi credentials
5) Once the pairing is complete you should see Smart RGll in device list

 

PROTECT THE CONNECTION!

Make sure you cover your power adapter to prevent water damage and failure! 

The power adapter is rated for wet locations, however the connection to extension cord is not waterproof. This connection must be placed in a weather proof housing, or enclosure to protect it from the elements. Even wrapping the connection with plastic wrap or weather proof material is recommended.